After the thread sequence is neatly arranged, one hand tightly pinches the front end of the thread, and the other hand uses the scissors mouth of the Network Cable pliers to cut the front end of the thread neatly. It is convenient to insert the cut Ethernet Cable into the RJ45 Plug.Insert the neatly organized Patch Cable into the RJ45 connector, with the copper side facing up and the shrapnel side down. When inserting, be sure to pay attention that the 8 twisted-pair wires should be inserted into the 8 slots of the RJ45 connector at the same time, do not use force, and must be inserted into the top of the RJ45, after inserting, pay attention to check the wire sequence and whether the network cable Plug it in. Insert the finished RJ45 into the 8-slot socket of the network cable pliers, firmly hold the network cable pliers and press it down. When you hear a pop, it proves that the crystal head has been pressed. When pressing the crystal head again, be careful to hold the crystal head and the network cable tightly to prevent the network cable from falling off and wasting the crystal head. Use the same method to make the crystal plug at the other end of the network cable, and then use a cable tester to test it. If the 8 indicator lights are lit in sequence, it proves that the crystal plug is qualified and can be used normally.

 

1. Attention should be paid to minimize the unbuttoned length of the wires that have not penetrated into the connector of the plug connector. Do not unbutton all the stripped wires, otherwise the electrical performance of the jumper will deteriorate.

 

2. When threading cables, pay attention to arrange the threading sequence according to the standard to minimize the crossover between cables.

 

 

HP Server, Router switch Lan firewall Modern, Computer mac IP phones TV, Gaming system PS4 PS3 xbox 360 lan network networks networking switch TV ADSL computer laptop netgear TPlink router moderm NAS VoIP phones POE Server media players, PS3 PS4 Xbox360 gaming system.