The Network Cable pliers are mainly used to press the RJ45 Plug to ensure that the copper sheet on the RJ45 and the core of the Ethernet Cable are clamped tightly. Take out the prepared Lan Cable, and cut the twisted pair with the scissors mouth of the network cable pliers. Then insert the network cable into the stripping blade of the network cable pliers, hold the network cable pliers firmly and rotate it slowly, and cut the outer jacket of the Pathc Cable. There are two points to pay attention to here: First, when stripping the outer jacket of the network cable, the hand holding the network cable pliers should be careful to grasp the strength, and do not cut the core of the inner network cable to avoid short circuit. Second, the stripped network cable should be controlled to about 3cm, not too long or too short, so that it is convenient to make a crystal head. Since the network cable is a twisted pair structure, twisted in pairs, you should untie the stripped network cables one by one, and then arrange them neatly according to the T568B line sequence. The line sequence is white orange, orange, white green, blue, white blue, and green. White brown, brown.

 

 

HP Server, Router switch Lan firewall Modern, Computer mac IP phones TV, Gaming system PS4 PS3 xbox 360 lan network networks networking switch TV ADSL computer laptop netgear TPlink router moderm NAS VoIP phones POE Server media players, PS3 PS4 Xbox360 gaming system.