The Difference between Network Cable and Lan Cable

2022-04-07 08:59:48

There are three main differences between them:

 

The Network Cable is a small switch that controls the current flow on the circuit board. Its function is to adjust the on-off relationship of different electrical signals on the device, and to adjust the working state of the device, such as determining the mainboard voltage, the master-slave relationship of the driver, and so on. The Lan Cablebelongs to Twisted pair (UTP) is one of the most commonly used transmission media in integrated wiring projects. It is composed of two copper wires with an insulating protective layer. Two insulated copper wires are twisted together at a certain density, and the radio waves radiated by each wire during transmission will be offset by the radio waves emitted by the other wire, effectively reducing the degree of signal interference.

 

The function of the Ethernet Cable is to adjust the on-off relationship of different electrical signals on the device, and to adjust the working status of the device, such as determining the mainboard voltage, the master-slave relationship of the driver, and so on. When the network cable clip is put on two cable posts at the same time, it means that the two cable posts are connected. If only one or no cable posts are put on, it means it is disconnected. Lan cable are generally used more on engineering wiring and are indispensable for connecting to local area networks.

 

Network cable include computer board card cable, optical fiber jumpers, ethernet cable and so on.

The lan cable is twisted pair.